HAMMER UNION

PAN Industries offers a complete range of hammer unions in standard and sour service. Hammer unions are commonly used in oilfield industry to seal two pieces of pipe or hose together and connected by threads or welds. They are high-pressure threaded or welded connections with two halves, a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half.

 

Description

To fit different sizes of pipe or hose, corresponding types of hammer unions are designed. In most cases, they come in sizes from 1″ up to 10″ and in pressures from 1,000 psi up to 15,000 psi. We distinguish pressure ratings with different colors.

Below is the chart for complete pressure rating and color codes for each high-pressure hammer union available.

These unions are manufactured with latest techniques and workmanship with correct raw material suitable for specific Pressure Rating and service.

 

Assembly colour code for standard service

Pressure Rating ( PSI ) Nominal Pipe Sizes
Fig. Standard Service Sour Gas Service (in.) ½ 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10
No.
Cold Test Cold Test (mm) 13 25 32 38 50 65 80 100 125 150 200 250
Working Working
50 500 750 N/A N/A
100 1,000 1,500 N/A N/A
101 1,000 1,500 N/A N/A
200 2,000 3,000 2,000 3,000
201 2,000 3,000 2,000 3,000
206 2,000 3,000 2,000 3,000
207 2,000 3,000 2,000 3,000
211 2,000 3,000 N/A N/A
300 3,000 4,500 N/A N/A
400 4,000 6,000 4,000 6,000
 
602 6,000 9,000 6,000 9,000
1002 10,000 15,000 7,500 11,250
1003 10,000 15,000 7,500 11,250
1004 10,000 15,000 7,500 11,250
1502 15,000 22,500 10,000 15,000
2002 20,000 30,000 N/A N/A
2202 N/A N/A 15,000 22,500
6666 6,000 9,000 N/A N/A